16
RESETTING THE SCP-99
If the SCP-99’s display locks up or does not work
properly after you connect power, you must reset it.
To reset the SCP-99, short both of the the copper
pads in the
RESET
hole behind the cassette compart-
ment door by touching them with the tip of your head-
phones’ or speakers’ plug.
Caution: If you short the copper pads with anything
other than the speakers’ or headphones’ plug, you
may damage the SCP-99.
Important: Resetting the SCP-99 clears all the set-
tings you have stored. Reset the SCP-99 only when
you are sure it is not working properly.
14-1243.fm Page 16 Friday, July 2, 1999 12:15 PM