PM-804A Version 1.1
Page 8 of 11
PM-804A
8x4 Matrix Mixer
8. 4-ZONE PAGING MICROPHONE STATION PM-4Z
1. Signal LED indicator.
2. Clip LED indicator.
3. Gooseneck microphone input XLR connector (supplied).
4. Power LED indicator.
5. All zone selector.
6. Individual zone selector.
7. Pre-announcement chime.
8. Announcement/Talk button.
9. Locking switch.
10. RJ45 connector for power, control and audio signal to the PM-804A matrix.
11. Output level control.
OPERATION OF PM-4Z MICROPHONE STATION:
Press zone selection button Z1 to Z4 for individual zone announcement.
Selected zone LED indicator will light. Press same zone selection button again to
remove selected zone.
Press CHIME button to play pre-announcement chime.
Press and hold TALK button to send an announcement to selected zone/s.
Zone selection buttons are not available when the locking switch is at LOCK position.
Output level signal (chime + microphone) can be controlled by rear volume. It is not
controlled by any other of PM-804A volume controls.
Note: The microphone must be connected to the mixer before startup. Hot connection may produce
communication problems, in that case restart the mixer.
