9
Follow these steps to recharge the
nickel-cadmium battery pack while it
is in the battery compartment.
1. Attach the 4.0 mm outer diame-
ter/1.7 mm inner diameter barrel
plug to the adapter cord, match-
ing the positive (+) on the plug
with TIP on the cord.
2. Set the adapter’s voltage switch
to 6V.
3. Insert the adapter’s barrel plug
into the CD player’s
EXT DC 6V
jack.
4. Plug the adapter’s other end
into a standard AC outlet.
5. When the nickel-cadmium bat-
tery pack fully charges, unplug
the AC adapter from the AC out-
let, then disconnect the adapter
from the CD player.
Notes:
• It takes about 10 hours for the
CD-3540 to charge a fully dis-
charged nickel-cadmium battery
pack.
• You can play a CD while
recharging the battery pack;
however, this could cause the
battery pack to recharge more
slowly.
Charging Tips
• Always keep the charging termi-
nal clean. Use a cotton swab to
clean the terminal.
• Under normal usage condi-
tions, the nickel-cadmium bat-
tery pack can be recharged
about 500 times.
EXT DC 6V
42-5066.fm Page 9 Thursday, August 12, 1999 9:56 AM
