Optimus 13-1277, Owner'S Manual

Page: 29 / 48

29
Copying Cassette Tapes
The System 730 lets you dub (copy)
one cassette tape to another, one
side at a time, using its dual cassette
decks (TAPE 1 and TAPE 2).
1. Load a blank cassette tape, or
one you want to record over, into
TAPE 2.
2. Load the tape you want to
record from into TAPE 1.
3. Press
PAUSE
, then
RECORD
on
TAPE 2.
PLAY
automatically
locks down with
RECORD
and
PAUSE
.
4. To record at one and a half times
the normal speed, press
HI-
SPEED
. HI-SPEED appears on
the display. To set it back to nor-
mal speed, press
HI-SPEED
again. HI-SPEED disappears.
5. Press
PLAY
on TAPE 1. The
tape in TAPE 1 begins to play,
PAUSE
automatically releases
on TAPE 2, and TAPE 2 begins
to record.
6. To listen to the tape in TAPE 1
during recording, adjust
VOL-
UME
(or press or
–
on
the remote control) to the
desired listening level, and
select the desired
X-BASS
and
graphic equalizer settings.
Note: If you use
HI-SPEED
dur-
ing recording, you hear the
sound at one and a half times
the normal speed.
7. To briefly stop the tape in either
deck while recording, press
PAUSE
on that deck. The button
locks and the tape stops. Press
PAUSE
again to resume record-
ing.
8. The System 730 automatically
stops the tape in each deck
when the tape reaches the end
of the side.
To stop the tape in either deck at
any time during recording, press
STOP/EJECT
on that deck.
13-1277.fm Page 29 Wednesday, July 14, 1999 4:11 PM