DR01 - EN
Version 1 - 2020-04-09
9
Translation of original instruction
DRO1
EN
OP_B
A_DRO
1_GB
.f
m
1.12
Preset tool offset value
A. Function description: Tool compensation function for tool reference point correction or work-
piece 45° correction or bar correction, etc.
Example: The default factory value with tool compensation is zero. There is no tool compensa-
tion. The setting for a tool compensation of 20mm is as follows.
Step 1. Press and hold
the button
, the symbol
is displayed in
the upper right corner of the screen, and after about 5
seconds you will be directed to the parameter setting.
Step 2. Press
again until OFFSEtS appears
in the display.
Step 3. Press
to access the parameter
selection.
Step 4. Press
to display the current
compensation value.
(0 or value flashes)
Step 5. Press
to select the +/- value or to set
the number.
Value. Press
to move between the digits.
Step 6. After confirming the value of the screen, press
the button
to return to the selection screen.
Step 7. After the adjustment is completed, press
twice to return to the operation screen.