Optimum DPA 22, Operating Manual

Page: 14 / 38

OPTIMUM
M A S C H I N E N - G E R M A N Y
Installation
Version 1.0 dated 2015-03-31 Page 14 Original operating instructions
DPA22 GB
2.7.1 Assembly of the measurement gib housing

Before mounting it on the machine, check the operability of the measuring gauges. To do
so, use the digital position indicator or a similar device.

Install the measuring gauge in a way that it will not be damaged by cutting tools or coolants.
If required, mount a cover or drip moulding.

If possible, mount the enclosed measuring gauge with the sealing lips showing downward.

If possible, place the reading head stationary in order to avoid damages of the connection
lines by its movements.
2.7.2 Assembly of the reading head
The measuring jib and sensor head are to be mounted separately on parts of the machine
which are movable in relation to one another. The fixed and movable parts of the machine must
correspond to the requirements and maximum tolerances as given in

Img.2-9:.
Img.2-9:

Check the measuring gib mounting level as shown in

Img.2-9:.

Mount a fixture for the reading head.

Fix the reading head to the fixture.
Measuring length
Mounting length
Total length
a (Measuring jib top surface)
b (Measuring jib side surface)