Description of the connection
OPTIMUM
M A S C H I N E N - G E R M A N Y
29 / 11 / 2006
Page
10
Description of the connection CNC Controller III and VI ; Version 2.0.1
©
20
06
GB
7.2
Control board version 1
Fig.7-3: Control board CNC controller V1
7.2.1
Setting jumpers
When exchanging a control board, a control board has to be set as master control board, the
other control boards always as slave control boards. The setting is performed over a jumper.
The master board is always exclusively in the slot of the X or X
1
-axis and the jumper is set as
displayed below.
CAUTION!
The master board is only in the slot of the X or X
1
-axis.
Fig.7-4: Position jumper "master"
Fig.7-5: Position jumper "slave"
Potentiometer
Jumper Master / Slave
Jumper in position "master"
Jumper in position "slave"
