8
– staff kitchen areas in shops, offices and other working environments;
– farm houses;
– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments.
SPECIAL SAFETY INSTRUCTIONS FOR THE KETTLE
• Use only cold water when filling the device.
• Do not use the electric kettle for other liquids, only with
drinking water.
• The water level must be between the MAX. and MIN. marks.
• Do not overfill. Use the water level indicator.
•
WARNING!
If this product is filled above max. level, hot
water may be ejected
• Always ensure that the lid is tightly closed.
• Only boil water with the lid closed. Otherwise the kettle could
boil over and cause burns and property damage.
•
WARNING!
Do not remove the lid while the water is
boiling.
• Never touch the kettle during or immediately after operation.
•
WARNING!
Position the lid so that steam is directed from
the handle.
• Only hold or carry the kettle using the handle.
• When the water boils, hot steam will be emitted, Be careful
not to burn yourself.
•
CAUTION!
Ensure that the kettle is switched off before re
-
moving it from its stand.
• The base and exterior of the kettle must not become wet.
• Clean the appliance only after it has completely cooled down.
• The electric kettle is not designed to be used with an external
timer or a separate remote control system.
• Never leave the electric kettle unattended during operation..
FIRST USE OF THE KETTLE
Before using the kettle for the first time, fill the kettle with cold
water and boil it twice without any additives.
1) Remove the kettle from the base, open the lid, and fill the
appliancewith cold water within the permitted maximum
only (MAX marking on the cover of steam pipe inside the
kettle).
2) Electrical connection
• Check whether the electrical voltage which you intend to
use is the same as that of the kettle’s. Details can be found
on the label on the base of the kettle.
• Only connect the kettle to a properly installed 220-240 V
50 Hz socket.
3) Switch the kettle to position ‘I’. The control lamp on the
water indicator shows that the water is boiling.
4) After boiling, the kettle switches off automatically.
Disconnect the kettle from the mains electricity supply.
CLEANING
Always remove the plug from the mains supply before cleaning
the kettle.
The exterior of the kettle should be cleaned, if necessary, with
a slightly damp cloth without additives.
Dry the kettle and base well before using the electric kettle
again.
The filter can be removed for cleaning
DESCALING
Over time, limescale can build up in the kettle. This can result
in energy loss and reduce the lifespan of the kettle. Limescale
should therefore be removed as soon as it becomes visible.
• Use a descaling agent suitable for coffee ma
-
chine and other household appliances. Proce
-
ed as described in the instruction for using the
descaling agent.
• After descaling, rinse the kettle out multiple times with plenty
of clean water.