OPTIMUM
M A S C H I N E N - G E R M A N Y
Version 3.1.8 dated 2015-1-27
Page 20
Original operating instructions
BF20V
US
3.3
Storage
ATTENTION!
In case of wrong and improper storage electrical and mechanical machine components
might get damaged and destroyed.
Store packed and unpacked parts only under the intended environmental conditions.
Follow the instructions and information on the transport case.
3.4
Installation and assembly
3.4.1 Requirements regarding the installation site
Organize the working area around the mill drill according to the local safety regulations.
INFORMATION
In order to attain good functionality and a high processing accuracy as well as a long durability
of the machine the installation site should fulfil certain criteria.
Please observe the following points:
The device must only be installed and operated in a dry and well-ventilated place.
Avoid places nearby machines generating chips or dust.
The installation site must be free from vibrations also at a distance of presses, planing
machines, etc.
The stand must be suitable for the mill drill. Also make sure that the floor has sufficient load
bearing capacity and is level.
The stand must be prepared in a way that possibly used coolant cannot penetrate into the
floor.
Any parts sticking out such as stops, handles, etc. have to be secured by measures taken
by the customer if necessary in order to avoid endangerment of persons.
Provide sufficient space for the staff preparing and operating the machine and transporting
the material.
Fragile goods
(Goods require careful handling)
Protect against moisture and humid environment
"Environmental conditions“ on page 16
Prescribed position of the packing case
(Marking of the top surface - arrows pointing to the
top)
Maximum stacking height
Example: not stackable - do not stack a second
packing case
on top of the first one.
