Version 1.0.2 - 2020-07-20
20
Translation of original instruction
TM3310 | TM3310D
EN
T
M
3310_
GB_3
.f
m
3.4.3
Lifting with a forklift
Put two steel rods with a diameter of 30 to 34mm (round steel C45, thick - walled tube) and
a length of one meter through the holes of the machine substructure.
Firmly clamp the tailstock.
Slowly raise the machine on the steel rods with a forklift. Use long forks.
3.4.4
Lifting by crane
Disassemble the splash board on the lathe.
Put an adequately thick piece of steel with a diameter of 30 to 34mm (round steel C45, thick
- walled tube) and a length of one meter through the hole of the machine substructure.
Suspend a lifting sling to each of the two sides of the machine bed and to the ends of the
piece of steel. Secure the lifting slings on the steel rods with clamping rings to prevent slip-
ping.
Firmly clamp the tailstock.
Slowly raise the machine using the crane.
Forklift truck
Steel rod
Traverse
Lifting slings,
Round slings
Steel rod
