background image

Safety

Version 1.0.1 - 2020-8-10

4

Translation of original instruction

GU30

GB

GU30_

GB.

fm

1.1.2 Other pictograms

1.2

Intended use

WARNING!

In the event of improper use, the grinding machine

will endanger personnel,

the grinding machine and other material property of the operating company will be 
endangered,

the functionality of the grinding machine may be compromised.

The grinding machine is designed and manufactured exclusively for grinding metals using prop-
erly authorised grinding wheels.

The grinding machine must be used exclusively for this purpose.

If the grinding machine is used in any way other than described above, modified without author-
ization of Optimum Maschinen Germany GmbH, then the grinding machine is being used
improperly. 

We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.

We expressly point out that the guarantee will expire, if any constructive, technical or proce-
dural changes are not performed by the company Optimum Maschinen Germany GmbH. It is
also part of the intended use that you

the limits of performance of the grinding machine are observed,

the operating manual is observed, 

the inspection and maintenance instructions are observed.

Activation forbidden!

Warning: flammable 

substances!

Warning: suspended loads!

Warning: risk of stumbling!

Warning: tilting danger!

Warning: automatic start-

up!

Warning: biological hazard!

Warning: injuries to hands!

Read the operating 

instruction before 

commissioning!

Pull out the mains plug!

Wear protective glasses!

Use face shield!

Wear safety shoes!

Wear a protective suit!

Use ear protection!

Protect the environment!

Summary of Contents for 3101530























Reviews: