Maintenance
Version 1.0.1 - 2020-08-18
26
Translation of original instruction
DP33
EN
D
P
33_G
B.
fm
INFORMATION
Use a water-soluble and non-pollutant emulsion as a cooling agent.This can be acquired from
authorised distributors.
Make sure that the cooling agent is being collected.
Respect the environment when disposing of lubricants and coolants.
Follow the manufacturer’s disposal instructions.
5
Maintenance
In this chapter you will find important information about
Inspection
Maintenance
Repair
of the drilling machine.
ATTENTION!
Properly performed regular maintenance is an essential prerequisite for
operational safety,
failure-free operation,
a long service life of the drill and
the quality of the products which you manufacture.
Installations and equipment from other manufacturers must also be in good order and condition.
5.1
Safety
WARNING!
The consequences of incorrect maintenance and repair work may include:
Extremely serious injuries to those working on the drill and
damage to the drill.
Only qualified personnel should carry out maintenance and repair work on the drill.
5.1.1
Preparation
WARNING!
Only work on the drill if it has been disconnected from the power supply.
5.1.2
Restarting
Before restarting, run a safety check.
WARNING!
Before starting the drill you must be sure that
no dangers generated for persons,
the drill is not damaged.
5.2
Inspection and maintenance
The type and level of wear depends to a large extent on the individual usage and operating
conditions.