Operation
Version 1.0 - 2020-09-04
22
Translation of original instructions
DX17E
EN
D
X
17E
_GB_
4.
fm
4.2
Drill chuck guard
Adjust the guard to the correct height
before you start working.
Push the drill chuck protection up or down.
Loosen the clamping screws and adjust the
total coverage height.
There is a switch integrated in the spindle
protection mounting which monitors the
closed position.
INFORMATION
The machine cannot be started, if the
drill chuck guard is not closed.
Img.4-1:
Drill chuck guard
4.3
Control panel
17
12
13
10
11
16
14
15
Pos.
Designation
Pos.
Designation
10
Start
11
Stop
12
Switching over the display
Spindle speed or drilling depth
13
Switching over the display
Drilling depth in millimetres or inches
14
Set zero point drilling depth
15
Speed setting
16
Switching the direction of rotation
17
Display