Delivery, interdepartmental transport and unpacking
Version 1.0.1 - 2021-1-28
27
Translation of original instruction
GB305D
EN
GB30
5D_GB
.f
m
The following points should be noted:
The device must only be installed and operated in a dry and well-ventilated place.
The work table must be suitable for the disc sander. If necessary, this table must also be
firmly connected to the subfloor.
Provide enough space for set-up and operating personnel and material transport.
Ensure adequate lighting is available (minimum value: 500 Lux, measured at the tool tip). In
the event of a lower level of lighting, additional illumination must be provided, e.g. by means
of a separate workplace light.
The power plug of the disc sander must be readily accessible.
CAUTION!
Arrange the machine's connection cable in such a way that it will not cause a tripping
hazard.
3.5.2
Extraction socket
For certain operations, it may be appropriate to connect
the disc sander to an extraction system or to an industrial
vacuum cleaner. The suction connection at the side of the
disc sander is 50 mm in outer diameter.
P
50
