Maintenance
Version 1.0 2019-01-17
Page 55
Translation of the original instructions
B17Pro basic
GB
B17P
ro_b
asic_
G
B.
fm
OPTIMUM
M A S C H I N E N - G E R M A N Y
®
4.8
During work
The spindle sleeve feed is done via the star grip. Make sure that the feed is constant and not
too fast. The spindle sleeve is returned to its initial position by the return spring.
WARNING!
Seizing of clothes and / or hair.
Make sure to wear well-fitting work during drilling work.
Do not use gloves.
If necessary, use a hairnet.
CAUTION!
Danger of bumps from the levers on the star grip. Do not release the star grip when
repositioning the drilling spindle sleeve.
The smaller the bit the more easily it may break. In the case of deep drilling, remove the bit
from time to time to remove filings from the drill. Add a few drops of oil to reduce friction and
prolong the service life of the bit.
CAUTION!
Danger of crushing. Do not place your hand between the drilling head and the
spindlesleeve.
5
Maintenance
In this chapter you will find important information about
Inspection
Maintenance
Repair
of the drilling machine.
ATTENTION!
Properly performed regular maintenance is an essential prerequisite for
operational safety,
failure-free operation,
a long service life of the drill and
the quality of the products which you manufacture.
Installations and equipment from other manufacturers must also be in good order and condition.
5.1
Safety
WARNING!
The consequences of incorrect maintenance and repair work may include:
Extremely serious injuries to those working on the drill and
damage to the drill.
Only qualified personnel should carry out maintenance and repair work on the drill.
5.1.1
Preparation
WARNING!
Only work on the drill if it has been disconnected from the power supply.
