Optima Scale OP-902 User Manual Download Page 4

2

FEATURES

 

● Smooth indicator shape with steady performance PCB board, is suitable for  

industrial or commercial use

 

● Multiple weighing units: (lb/oz/kg)

 

● Gross/Tare/Zero

 

● Low power design, longer battery usage time

 

● Hold function, locks the weight

 

● Idle mode and automatic power off function

 

● Low-battery detection and warning

 

● 6 digits 0.7” tall LCD display with backlight

 

● Splash proof  keyboard and display

 

● RS232 Output 

 

● Print to an optima scale ticket printer

 

● Stainless steel wall mount bracket included

TECHNICAL PARAMETERS

 

● Accuracy class: OIML III, n=3000e

 

● Tare range: 2%~100% max. capacity

 

● Initial zero range: ±10% max. capacity 

 

● Manual zero range: ±2% max. capacity

 

● Resolution - Display: Up to 1/15,000 Display Resolution

 

● Operation temperature: -10 °C ~ +40 °C

 

● Operation humidity: ≤90%RH

 

● Storage temperature: -40 °C ~ +70 °C (32-104°F)

POWER SUPPLY

 

● The indicator uses 3 AAA batteries which will work for about 30 hours with the 

backlight turned on, if you turn off the backlight the battery can last up to 100 
hours

 

●  

 This low battery icon will display when the indicator detects low battery, if not 

replaced in time the indicator will power off automatically

 

● If you are using the included DC power supply, the indicator will not use battery 

power

 

● Plug the adapter directly into the “DC” pin located at the back of the indicator. We 

recommend to plug into a wall outlet to avoid interference with other wirings

Summary of Contents for OP-902
















Reviews: