background image

Optilia Instruments AB 

 
 
 
 

 

www.optilia.eu

 

  

Rev D, January-2011 

 

condition and occupying more than 50% of the image when you set 

the white balance at this mode.   

Auto

: This mode computes the white balance output using colour 

from the entire screen  

Manual

: Manual Control of R- and B-gain 

Picture Effect 

Sets the picture to Normal, Black & White or Negative 

Gamma 

Normal

: Produces images with the standard video gamma curve 

Type 1

: Reproduces images with more dept 

Type 2

: Reproduces images with deeper contrast  

NIR Vision 

Enables the Near Infra Red mode. Camera will be sensitive to light 

wavelengths from 400nm (blue) to 980nm (NIR).  

Video Out Mode 

Sets the video output system to 1080/59.94i (Interlaced), 1080/50i 

(Interlaced), 750/59.94p (Progressive), 720/50p (Progressive), 

NTSC (Corp) or PAL (corp).  

Hardware restart

 is required in order to apply the video out mode 

changes.  

Keyboard Hotkeys 

Keys 

Action 

Arrow Up/Down 

Move cursor between controls 

Arrow Left/Right 

Adjust controls 

Tab  

Move cursor between all 

Enter  

Run buttons 

Spacebar 

Freeze/Unfreeze picture 

F1-F12 

Select cameras 

 

 

  

 

 

 

 

 

Camera Control interface  

Camera Adjust interface  

Summary of Contents for W10x-HD

Page 1: ...ench and mount the W10x HD camera onto the horizontal Boom 3 Adjust height of the Boom for 245mm Working distance measured from front edge of the camera W10x HD camera with standard optics has a focusing interval of approximately 190 250mm Auto focus will not function properly outside this range 4 Working distance of the camera needs to be decreased according to the bellow if close up lenses are a...

Page 2: ...side of the Camera 6 Connect RS232 cable of W10x HD to COM port of PC Laptop or external Control Unit optional accessory Use the included USB COM converter device if your computer only provides Serial COM ports Connect the camera to Power Supply MiniDin connector In case of external Control Unit please refer to its instructions manual for more information 7 Install W10x_HD Camera Control software ...

Page 3: ...n Auto is selected focus position is automatically adjusted to the high frequency content of the picture in a centre measurement area taking into consideration the high luminance and strong contrast components If camera cannot focus automatically user should focus manually or readjust Brightness Night Vision Manual ON button enables disables the Night Vision mode and sets the picture to black and ...

Page 4: ...Type 2 Reproduces images with deeper contrast NIR Vision Enables the Near Infra Red mode Camera will be sensitive to light wavelengths from 400nm blue to 980nm NIR Video Out Mode Sets the video output system to 1080 59 94i Interlaced 1080 50i Interlaced 750 59 94p Progressive 720 50p Progressive NTSC Corp or PAL corp Hardware restart is required in order to apply the video out mode changes Keyboar...

Reviews: