1. Description
Camera Control Unit is a user friendly and ergonomically designed device for direct control of
Optilia High Definition inspection cameras without use of PC.
Camera parameters and functions like Zoom, Colour, Brightness, Focus, Iris and Exposure
time are directly selected by functions buttons and controlled by Joystick. In addition, the
operator can Freeze the live image or Save and Recall any configuration by pressing one
button.
Camera Control Unit communicates with Optilia HD cameras via serial RS232
communication protocol.
2. Connections Power-On Sequence
a) Attach circular connector of HD camera to the mating connector on Control Unit.
b) Attach the Foot Switch to external foot switch input of the Control Unit (Optional)
c) Connect the Power supply to 12/5 V DC-input of Control Unit.
d) Switch On the Control Box.
After switching on the Control Box it will load the last saved configuration and start the
Camera.
Note:
W10x-HD camera has a local On/Off switch on its rear panel. Always set this switch to
“ON” when operating the camera with Control Unit.
HD camera connection
Foot Switch connection
12/5VDC Power in
Power On/Off switch