BCB-
4 User’s Manual
Page 2 of 14
Optilab, LLC
600 E. Camelback Road, Phoenix, AZ 85012
Phone: (602) 343-1496, Fax: (602) 343-1489, Email: [email protected]
2. Operation
2.1 Introduction
This chapter describes how to operate the BCB-4 unit and discusses the
location and function of the controls and connectors.
2.2 Initial Inspection
Your BCB-4 unit was carefully inspected before it left the manufacturer. It
should be in proper working order upon receipt. You should, however, inspect
the unit for any damage that may have occurred in transit. If the shipping
container or the packing material is damaged, keep it until the contents of the
shipment have been checked to be free of mechanical and electrical damages.
Notify Optilab, LLC promptly if any notable damage is found.
Each BCB-4 shipment should include the following:
•
BCB-4 module unit
•
User Manual
•
Test Data
•
Calibration Data (if ordered with PD)
•
Optilab power/com interface module
•
6 pin power/com interconnect cable
•
2 pin bias interconnect cable
•
4 pin power interconnect cable
•
USB Cable
Optional accessories:
•
Optilab PS-5-M, ±5V DC power supply