OPTIKON I.V., Installation And Operating Manual, Page: 10 / 21

I.V. Pole cart Installation and operating manual
OPTIKON 2000
Code 181004EN 2007-10-09 Rev. 0
3-2
•
EXCHANGING FUSES SHOULD BE DONE A FEW MINUTES AFTER THE
MAINS SWITCH HAS BEEN TURNED OFF.
•
REPLACE FUSE AS MARKED.
•
NEVER LIFT OR MOVE FOOTSWITCH BY THE CABLE. DAMAGE MAY
RESULT.
•
DO NOT EXCEED THE FOLLOWING MAXIMUM LOAD LIMITS:
MAYO TRAY: 2KG
EQUIPMENT TRAY 30KG
BOTTLE HOOK 1KG
OVERLOADING THE CART MAY CAUSE MECHANICAL FAILURES AND
POSSIBLE HARM FOR THE PATIENT AND/OR THE OPERATOR.
•
THE POLE EXTENDS UP TO A MAXIMUM OF APPROX. 235cm OF
HEIGHT: DO NOT PLACE THE CART UNDER LOW CEILING.
•
DO NOT TILT THE CART MORE THAN 10° IN ANY DIRECTION.
•
TO AVOID RISK OF SMOKE OR FIRE, WHEN PLUGGING HOSTED
EQUIPMENT TO THE CART, DO NOT EXCEED THE SPECIFIED MAXIMUM
ELECTRIC LOAD (SEE TECHNICAL SPECIFICATIONS AND THE
LABELING OF THE CART).
•
TO AVOID POSSIBLE ELECTRIC SHOCK TO THE PATIENT DUE TO
EXCESSIVE LEAKAGE CURRENT OR INSUFFICIENT DIELECTRIC
STRENGTH, PLUG TO THE CART COMPATIBLE OPTIKON EQUIPMENT
ONLY (SEE COMPATIBILITY CHART IN THE TECHNICAL
SPECIFICATIONS).
•
DO NOT DISPOSE OF THE TROLLEY AS UNSORTED MUNICIPAL WASTE.
COLLECT IT SEPARATELY ACCORDING TO THE LOCAL
LAWS/REGULATIONS ON DISPOSAL OF WASTE ELECTRICAL AND
ELECTRONIC EQUIPMENT.