Keratron™ Installation and operating manual
OPTIKON 2000
Cod. 161501EN
9-10
2014-04-23
Rev.0
Figure 9-10: In DHCP it is possible to specify the computer name used for the connection to Keratron
™
9.5.2
CONFIGURATION WITH STATIC ADDRESS
Keraton™ Onda can be connected to a network using a static IP address following
the procedure shown in
Figure 9-11
.
The configuration fields (IP Address, Subnet Mask, Gateway
…) must be completed
using the
touchscreen
.
The values that have to be entered in these fields can be acquired from the
Default
addresses
. Considering that the configuration selected must meet the specific
regulations applicable to the network, it is strongly advisable to request the help of
the network administrator when completing these fields.
