Keratron™ Installation and operating manual
OPTIKON 2000
Cod. 161501EN
9-5
2014-04-23
Rev.0
Figure 9-3: Protocol configuration
TCP/IP in Windows XP
NOTE:
The configuration shown in Figure 9-
3 is compatible with the “Factory Default”
(factory settings) of Keratron
™
.
The address must be selected following specific rules and not randomly.
The configuration should be changed under the supervision of a network
administrator.
9.4.2
CONFIGURATION OF THE PC IN WINDOWS VISTA AND WINDOWS 7
In the case of Vista and Windows 7, the following is a possible
configuration sequence:
Start
→Control Panel → Display Network Status and Activity
At the end of the sequence, in the Sharing and network connections center
window select
hyperlink
Display Status
(1 in Figure 9-4) for the network selected
for the connection.
