Page 10
3.0 INSTALLATION
3-2-7 Connecting the power cord (fig.10, 11 & 12)
► Do not tension or otherwise stress the power cord. If bent,
the wires may easily break.
1.
Turn the main switch (1) to “O”(off) before connecting the power
cord.
2.
Insert the plug into the power jack (2) of the microscope.
3.
Plug the power cord (4) into the mains socket. Check for a safe
connection.
► Please use the supplied power cord. If lost or damaged,
please refer to qualified service.
► Connect the power cord to a grounded (earthed) power
supply only.
3-2-8 Replacing the fuse (fig. 10 & 11)
Before replacing the fuse, turn the main switch (1) to “O” (off)
and unplug the power cord. Rotate the fuse support (3) out of
the holder using a straight screwdriver. Insert a new fuse in the
support, then rotate the support back into the holder.
► Fuse rating: see back of the microscope.
Figure 10
Figure 11
1
2
3
Figure 12
5
4