Optika B-500 MET, Operation Manual

Page: 3 / 52

Page 3
SAFETY GUIDELINES
This microscope is a scientific precision instrument designed to last for many years with a minimum
of maintenance. It is built to high optical and mechanical standards and to withstand daily use.
Optika reminds you that this manual contains important information on safety and maintenance, and
that it must therefore be made accessible to the instrument users.
Optika declines any responsibility deriving from instrument uses that do not comply with this ma-
nual.
Safety guidelines
This manual contains important information and warnings regarding safety about installation,
use and maintenance of the microscope. Please read this manual carefully before using the
equipment. To ensure safe use, the user must read and follow all instructions in this manual.
OPTIKA products are designed for safe use in normal operating conditions. The equipment
and accessories described in the manual are manufactured and tested according to industry
standards for safety instrumentation laboratory. Misuse can cause personal injury or damage
to the instrument. Keep this manual at hand close to the instrument, for an easy consultation.
Electrical safety
Before connecting the power cord to wall outlet, ensure that your mains voltage for your
region corresponds to the voltage supply of the instrument, and that the illuminator’s switch
is in position OFF. The user must observe the safety regulations in force in his region. The
instrument is equipped with CE safety marking, in any case the user has full responsibility
concerning the safe use of that instrument.
Warning/Caution symbols used in this manual
The user should be aware of safety aspects when using the instrument. Warning or hazard
symbols are shown below. These symbols are used in this manual.
The instructions on this symbol to avoid possible severe personal injuries.
Warning of use; the incorrect operation on the instrument can cause damages
to the person or instrument.
Possibility of electric shock.
Attention: high temperature surfaces. Avoid direct contact.
Technical notes or usage tips.