Page 6
2.0 INTRODUCTION
3.0 UNPACKING AND ASSEMBLY
3.1
The components are stored in 2 separated boxes: one containing epifluorescence attachment, and
one containing power supply and mercury lamp case. Remove the protection caps from the top of the
main B-1000 body and from the epiilluminator and place the epiilluminator on the top of the microsco
-
pe body. Tighten the screw on the right side using the provided allen wrench.
3.2
Insert the mercury lamp case on the back of the epiilluminator and tighten the screws using the provi
-
ded allen wrench.
This equipment is a scientific precision instrument designed to last for many years with a minimum of main
-
tenance. It is built to high optical and mechanical standards and to withstand daily classroom and laboratory
use.
Optika reminds you that this manual contains important information on safety and maintenance, and that it
must therefore be made accessible to the instrument users.
Optika declines any responsibility deriving from instrument uses that do not comply with this manual.