Optika B-1000 MET, Instruction Manual

Page: 6 / 95

Page 6
Put the microscope stand on a
solid table.
First insert the incident illu -
mination attachment, using
the 2,5mm Allen wrench to
tighten the screw. All screws
are already inserted into each
threaded hole.
(Fig.1)
Unpacking
The microscope is housed in a moulded Styrofoam container. Remove the tape from the edge of the container
and lift the top half of the container. Take some care to avoid that the optical items (objectives and eyepieces)
fall out and get damaged. Using both hands (one around the arm and one around the base), lift the microscope
from the container and put it on a stable desk.
Assembling
Once you open the box, these are the microscope’s components:
① Condenser
② Optical head
③ Main body
④ Eyepieces
⑤ Polarizer/Analyzer
⑥ Stage
⑦ Objectives
⑧ Extension Tube
⑨ Lamp house
⑩ External power supply
⑪ Incident illumination attachment
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑪
Fig.1