Page 14
5.1 Always think about
-
The following environment is required: Indoor temperature: 0-40°C, Maximum relative hu
-
midity: 85 % (non condensing)
-
Keep the microscope away from dust and shocks while in use.
-
Turn off the light immediately after use.
-
Use a soft lens tissue to clean the optics after use.
-
Only if needed, use a cloth moistened with water and a mild detergent, rinsing with water
and drying immediately with a lint-free cloth.
-
After use, cover the microscope with the included dust-cover, and keep it in a dry and clean
place.
5.2 Do not!
-
Wipe the surface of any optical items with your hands. Fingerprints can damage the optics.
-
Use solvents, neither on the microscope, nor on the optics.
-
Disassemble objective or eyepieces to attempt to clean them.
-
Mishandle or impose unnecessary force on the microscope.
-
Clean the unit with volatile solvents or abrasive cleaners.
-
Attempt to service the microscope yourself.
TRANSMITTED ILLUMINATION:
Light source type X-LED with white LED; light intensity control using a knob on left side of the
frame.
LED power 3.6W, comparable to an halogen bulb 35W.
Color temperature: 6300K
LED average lifetime approx.: 50.000h.
The light exit can be used as a filter holder for additional filters (blue, yellow, frosted).
INCIDENT ILLUMINATION:
Light source type X-LED8 with white LED; light intensity control using a knob on left side of the
frame.
LED power: 8W, comparable to a 100W halogen bulb.
Color temperature: 6300K
LED average lifetime: approx. 50.000h.
The light exit can be used as a filter holder for additional filters (blue, yellow, frosted).
Voltage: 110/240Vac, 50/60Hz, 0,45 A; Fusibile: T3.15A 250V
Max required power: 13W
5.0 MAINTENANCE
6.0 ELECTRICAL SPECIFICATION