Step 4
Select shortcuts.
(If you don’t want it, check the blank box) Then, click the
“Next” button.
Step 5
Click
“Install” button and then, the installation will be completed.
Step 6
Check the box
“Launch Download GUI” and click the “Finish” button.
Step 7
Then, the Download GUI is completed to install the firmware download.
Step 8
Power on the Transmitter or Receiver and connect a PC to Service port on
the front side of Transmitter or Receiver over Mini-USB cable.
Step 9
Operate Download GUI and select Comport to select communication port of
PC. Then, click
“Download” button.
1-12 Firmware download
Step 10
Click
“Open” button and select download file (bin. Format)
Step 11
Click
“Start” button. Then the firmware will be downloaded
Step 12
The firmware download is completed and its status will be shown as below.
Step 13
Please close the program and reboot KVMX-100-TR to run it under new
firmware program.
1-13 Firmware download
