Opticon L-46X, User Manual

Page: 36 / 144

Chapter-3
Configurations
L-46X User's Manual 26
1st
Buzzer and Indicator 3.3.5
These commands reflect
“4.1 Buzzer” and “4.2 Status LED”.
Item Command Description Remark
Buzzer
B Sound the good read beep
Command
only
E Sound the error beep
Status LED L Flash the status LED
Trigger Command 3.3.6
The reading operation can be started and terminated by sending commands. When the read cycle
timeout (refer to 8.1.2) is set to 0 seconds (Y0 command), the read time with the Z command will be
‘Indefinitely’ and reading will continue until a Y command is received.
Item Command Description Remark
Trigger Command
Z Start the read cycle
Command
only
Y Stop the read cycle
Direct Numerical Input Command 3.3.7
When a command requires additional numerical input, the commands below can be used. Use these
in one packet together with the command that requires the numerical input.
Item Command Description Remark
Direct input numerical
values
Q0 0
Input in a
specified
format
Q1 1
Q2 2
Q3 3
Q4 4
Q5 5
Q6 6
Q7 7
Q8 8
Q9 9