16
Indicator
“Green” color
WLAN or GPRS Enable
4
LCM / Touch Panel
Do specific action through touch panel by stylus
5
Left Scan key
Right Scan key
Main Scan key
Start scanning the barcode by pressing any one of these three scan keys
6
Power key
Puts the terminal into and wakes the terminal from suspend mode.
7
F1 ~ F4 key
The four application keys, hot keys of application program defined by end
user.
8
Navigation key
Navigation keys for left, right, up and down directions
9
Alpha-Numeric keys
Numeric keys, Change to Alpha keys after pressing Alpha key.
10
Alpha key
Toggle Alpha-mode for Alpha-Numeric keys
11
Fn key
This key is used in combination with other keys to type special characters
and perform system functions.
12
Enter key
This key confirms data entry
13
Micro USB port
A connector to support MicroUSB Client
14
Scan window
A window for scanning of barcode reader
15
Stylus
Use the stylus for selecting items and entering information.
16
Battery Cover
Protect Battery pack, keep the switch of battery cover to leave system
from suspend mode
17
Battery cover Latch
To keep battery cover locked
18
Hand Strap
This strap can be sealed tighter or looser
19
Speaker
1W speaker for audio sound
2.3 Charging the Battery Pack
Before using the Device, perform the basic procedure of charging the battery pack through the following steps.
2.3.1 Installing the battery pack
1.
Turn the locking latches (right and left) downwards and lift the battery cover away from the Device.
Figure-8
Detach the battery cover from Device
2.
Insert the battery pack into the battery compartment with the label facing out, and ensuring the battery snaps into place.
Figure -9
Insert the battery pack
Summary of Contents for H25
Page 1: ...H25 User Manual ...
