manualshive.com logo in svg

Opticon H-19, Manual

Share
Download
Opticon H-19 Manual Download Page 21

21

Managing a Low Battery

When the low-battery warning appears, tap 

OK

 or 

Dismiss

 to close the warning and do the 

following:

Charging the Battery

1. To charge the battery, place the battery into the battery slot correctly. See previous section for 

how to install the battery.

2. Do one of the following:

• Connect the device with the AC adapter and plug the AC adapter into a power outlet.
• Connect the device to a PC with the USB cable.
• Place the device in a specific cradle for H-19 (the cradle is optional) and connect the cradle 

to an electrical outlet or a USB port on your PC.

To charge the device with the USB cable, you must connect the device to a functioning USB 
port on a PC that is powered on.

Do not operate your device to temperatures above 40˚C (72˚F) while charging the battery.

Do not leave the battery in a place above 60˚C (140˚F).

• Start charging or replace your battery.
• Close all applications and turn off the device.

Summary of Contents for H-19

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands