manualshive.com logo in svg

Opticon H-19, Manual

Share
Download
Opticon H-19 Manual Download Page 172

172

Chapter 10. Other Applications

PowerPoint Mobile

With PowerPoint Mobile, you can view PowerPoint slides on you device.

Starting a PowerPoint Presentation

1. Tap 

 > 

Office Mobile

 > 

PowerPoint Mobile

.

2. Tap the slide show you want to view in the presentation list.
3. Tap the current slide to advance to the next slide if slides don’t advance automatically.
4. Tap 

Menu

 > 

Rename/Move

 .

5. Enter a name for the document and tap 

 .

Stopping a PowerPoint Presentation

• In a slide show, tap 

 > End Show.

Navigating Between Slides

• Tap 

 > 

Next

 to go to the next slide.

• Tap 

 > 

Previous

 to go back to the previous slide.

• To jump to any slide in the slide show, tap  

 > 

Go to Slide

 and tap on the slide you want 

to view.

PowerPoint Mobile only supports slides in .ppt and .pps formats.

Summary of Contents for H-19

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands