Opticon H-16 Series Manual Download

Page: 17 / 160

Optimizing the Power Performance

•Tap

Settings

System

tab >

Power

Advanced

and adjust the time for turning off the device if it is not in use

Managing a Low Battery

When the low-battery warning appears, do the following:
1. Immediately save your current data.
. Start charging the battery or turn off your phone.

Charging the Battery

1. To charge the battery, place the battery into the battery slot correctly. See previous section for

how to install the battery.

. Do one of the following:

•Connect the device with the AC adapter and plug the AC adapter into a power outlet.
•Connect the device to a PC with the USB cable.

To charge the device with the USB cable, you must connect the device to a functioning USB port
on a PC that is powered on.

Do not operate your device to temperatures above 40˚C (72˚F) while charging the battery.

Do not leave the battery in a place above 60˚C (140˚F).

Summary of Contents for H-16 Series

































































































































































Search results

Summary of Contents for H-16 Series

Reviews:

Related manuals for H-16 Series

Brands by name

Popular brands

Opticon H-16 Series, Manual

Search results

Summary of Contents for H-16 Series

Reviews:

Related manuals for H-16 Series

Brands by name

Popular brands