Page 5
Scanning
If the scanner has a switch, depress button on
underside to turn the scanner on. Red LED
illumination will emit from the scan window. If the
scanner does not have a trigger switch, then the
LEDs will automatically remain on as long as the
computer system is on.
NOTE
: The scanner will not read any bar code
label which is wider than the scan window.
1. Approach, point or touch the bar code label
with the scan window of the CCD scanner.
2. Scan within a distance of 0 to 1.0" (2.3"
window); 0 to 2.5" (3.2" window) from the bar
code label.
3. Center the CCD scan window on bar code label
for fastest read.
4. The scanner will beep to indicate an audible
good read * (if beeper has not been turned off
by a menu option).
5. A green LED indicator will visually signal a
good read.
*
The scanner reads all bar code symbologies
listed in the menu section of this manual.
good read
indicator
scan
window
