System Requirements for Setup
Hardware requirements
You have to have a SDI multimedia systems (Camera, OB Van,
Broadcasting equipment using SDI signal, SDI Monitor etc.) or
it should support the maximum graphic resolution feature of
Monitors to be connected.
No special requirements of memory size, CPU speed and
chipsets, if you
’ve already properly installed your SDI systems.
Software requirements
No special restrictions, if you
’ve already properly installed your
SDI systems.
DC Power Adapter Technical Advisory
The SDIX-100(C) is designed to use only +5V external power.
Pin description
1-2 System Requirements for Setup
Installation
Important: Please follow the installation procedure as below. Improper or
no operation may result if the start-up sequence is not correctly followed.
Step 1
Carefully unpack the contents of the shipping group.
Step 2
Connect the plug of the Tx side of SDIX-100 to the receptacle of SDI source
(Camera, Broadcasting equipment etc.) directly. Do
NOT
recommend to use
any intermediate cable or adapter between them. It may deteriorate the signal
transmission performance.
Figure 2
– Tx module of SDIX-100
Step 3
As shown in Figure 3, plug the +5V power adaptor in the shipping group to the
Tx & Rx Module.
Connecting 5V power adaptor to SDIX-100 Cable is indispensable procedure
for working.
Figure 3
–SDIX-100 with power adapter
1-3 Installation
