![background image](http://html1.mh-extra.com/html/opticis/omm-2500/omm-2500_user-manual_1641704033.webp)
33
▪
The command input allows executing only one command. Multiple command inputs require
executing multiple strings having each command per a string.
▪
User can use capital letters and small letters for commands but cannot mix it like
‘Link’, it
must be corrected as
‘link’ or ‘LINK’.
▪
After all input commands, OMM-2500 sends back replies to conform the execution of
commands.
▪
Input and output port number range from 1 to 32 and prefix,
‘0’ can be used such as ‘001’
and
‘010, but in the replies after the command inputs, the digits of port number are two such
as
‘01’ and ‘10’.
6.2 Examples of command inputs
6.2.1 Link input and output
▪
It makes single or multi-connections of inputs and outputs.
▪
It makes disconnection of all inputs when used with
‘0’.
▪
It requests inputs and outputs status of OMM-2500.
Command
Description and reply
LINK=01^10!
Makes input 1 connected to output 10.
Reply: LINK=01^10!
LINK =1^03,04^7!
Makes input 1 connected to output 3 and 4 to 7.
Reply: LINK =01^03,04^07!
LINK =05!
Makes input 5 connected to all outputs.
Reply: LINK=05!
LINK =00!
Makes all connections disconnected.
Reply: LINK =00!
LINK =00^06!
Makes output 6 disconnected.
Reply: LINK =00^06!
Link=?!
Requests current inputs and outputs connections status.
Reply: LINK =01^01,02^04,~32^13!
Table 6.2 Link command examples
6.2.2 Input and output status
▪
It requests input signal status. If the input is connected, it replies input resolution, but if it is
not connected, it returns
‘Signal Off’.
▪
It requests output status whether it is connected to display or not.
Command
Description and reply
IN=05!
Requests input 5 status.
Reply: IN=[05]1920x1200p! or IN=[05]Signal Off!
OUT=12!
Requests output 12 status.
Reply: OUT=[12]Un Plugged! or OUT=[12]Plugged!
Table 6.3 Input and output status command examples