Welcome!
Congratulations on your purchase of the one (1) fiber DisplayPort extender,
DPFX-300-TR. This manual contains information that will assist you in
installing and operating the product.
Product Description
DisplayPort 1.2 one(1) fiber optical detachable extender, DPFX-300, extends
DisplayPort 1.2 signal up to 200m (656feet) and transmits 4K UHD
(4096x2160) at 60Hz over one(1) LC multi-mode fiber. Leading-edge
technology of Opticis allows long distance transmission of 4K signal without
any video/audio degradation.
DPFX-300-TR is designed compact enough to be fitted into various installation
environments. It gives slim, light, easy installation with perfect electrical
isolation, but without electrical hazard and interference.
Between Transmitter (DPFX-300-Tx) and receiver (DPFX-300-Rx), pure fiber
connection by single LC fiber connector gives clean, secure and easy
installation.
DPFX-300-TR can be operated by USB power without external DC power
adapter with plugging micro USB(DPFX-300 module side)
– USB
(source/display devices side) cable which is supplied in shipping group.
Figure 1
– Overall Connection of DPFX-300-TR
1-1 Welcome, Product Description
System Requirements for Setup
□
Hardware requirements
▪
You have to have a DisplayPort source and display. It should
support the maximum graphic resolution feature of displays to
be connected.
▪
No special requirements of memory size, CPU speed and
chipsets, if you’ve already properly installed your DisplayPort
systems or graphic cards.
▪
Proper initial trial of the entire platform with its application using
a short length copper cable is recommended prior to installation
with the optical link.
□
Software requirements
▪
No
special restrictions, if you’ve already properly installed your
DisplayPort systems.
□
Power Technical Advisory
▪
Enclosed Power Adaptors and USB cables supply power to both
Transmitter and Receiver.
□
Connection Advisory
▪
It is highly recommend that DisplayPort source is directly
connected into DisplayPort display output via DPFX-300-TR
without connection to incompatible distributor, switcher
and selector.
The Shipping Group of
DPFX-300-TR;
One (1) Transmitter (Tx) and One (1) Receiver (Rx)
One (1) 0.2m Male to Female DisplayPort copper cable
Two (2) Micro USB to USB cables
Two (2) 5V 1A power adapter
User
’s Manual
※
Default connection is direct connection to both source (Tx side) and
display (RX side)
※
If direct connection is impracticable, 0.2m DisplayPort copper cable
is strongly recommended to use on Tx(Display Source) side only
1-2 System Requirements for Setup
