Product Specifications
AVFX-100-TR Analog Video/Audio and Serial I/O Optical Extender
Compliance with VGA standard with DDC2B:
See the table below
for supporting resolutions.
Extension limit:
2km (6,560feet) over two (2) single-mode fibers
300m (985feet) over two (2) single-mode fibers
Audio:
3.5mm Stereo audio Jack
RS232C:
supports D-sub 9 Pin connectors for RS232C.
Fiber-optic Connection:
The Transmitter and Receiver of AVFX-
100-TR have duplex LC receptacles to be connected to both of
single and multi-mode LC duplex fiber.
Mechanical specifications of Transmitter and Receiver
boxes
Dimensions:
220mm x 140mm x 40mm (WDH)
Weight:
460
10.0 gram for each of Transmitter and Receiver.
Environmental Specifications
Operating temperature: 0°C to 50°C
Storage temperature: - 10°C to 85°C
Humidity: 5% to 85%
AC/DC Power Adapter
Power Output:
+5V, 3.0 A SMPS DC-power Adapter
Cord DC Jack:
Core is 5 V and outer cylinder is GND.
Support Resolution
Pixel Format
Refresh Rate
Pixel Format
Refresh Rate
800x600
56.0
1280x768
85.0
800x600
60.0
1280x800
60.0
800x600
72.0
1280x960
60.0
800x600
75.0
1280x960
85.0
800x600
85.0
1280x1024
60.0
1024x768
60.0
1280x1024
75.0
1024x768
70.0
1280x1024
85.0
1024x768
75.0
1360x768
60.0
1024x768
85.0
1400x1050
60.0
1152x864
75.0
1400x1050
75.0
1280x768
60.0
1440x900
60.0
1280x768
75.0
1600x1200
60.0
1-8 Product Specifications
Troubleshooting
The display displays only black screen.
Check that all AC and DC plugs and jacks used by external power
supplies (both Opticis and others) are firmly connected.
Ensure that power LED lit ON.
Ensure that the Transmitter and Receiver are connected correctly to
the PC and display, respectively.
Check if the PC and display are powered on and properly booted.
Reset the AVFX-100-TR using Reset button on Transmitter and
Receiver.
Re-boot up the system after reconnecting the LC optical fibers.
Screen is distorted or displays noises.
Check if the graphic resolution is properly set. Go to the display
properties and tap the settings.
Reset the AVFX-100-TR using Reset button on Transmitter and
Receiver.
Push
“AUTO” button
※
For more details, please see the page, 1-6.
Power off, disconnect and reconnect the LC optical then power on.
Maintenance
No special maintenance is required for this product. Ensure that this product
is stored or used in a benign environment free from liquid or dirt
contamination.
There are no user serviceable parts. Refer all service and repair issues to
Opticis or its authorized distributor.
Technical Support and Service
For commercial or general product support, contact your reseller. For
technical service, contact Opticis by email
or visit its
website at
www.opticis.com
.
1-7 Troubleshooting, Maintenance, Technical Support
Summary of Contents for AVFX-100-TR
Page 7: ......
