Optical Systems OSD2151 SERIES, Operator'S Manual, Page: 7 / 20

OPTICAL SYSTEMS DESIGN
DOC ID: 10110603
OSD2151 OPERATOR MANUAL
PAGE 7
1.3 TECHNICAL SPECIFICATIONS
TABLE 1: TECHNICAL SPECIFICATIONS
SPECIFICATION PERFORMANCE
Electrical Data Interface
IEEE802.3i/802.3u/802.3ab 10/100/1000Base-T Ethernet
Electrical Data Rate 10, 100, 1000Mbps with energy detect, auto negotiate, auto MDIX
Optical Data Interface
IEEE802.3z 1000Base-Lx/Sx
Optical Data Rate 100Mbps or 1000Mbps
Operating Mode
Half or full duplex for 10/100
Full duplex for 1000
Pause frames for 1000Mbps flow control
Electrical Data Connector RJ45
Optical connector SFP
SFP Options
Short haul, long haul, single fiber operation, etc
Please consult OSD datasheet #102100002 or contact OSD
User Controls
Three externally accessible switches;
1. 100/1000BASE-X for optical port
2. Link Loss Forwarding Enable/Disable
3. Fault Detection on fiber port or RJ45 port / both
Dimensions (mm) 60W x 94D x 26H
Weight 0.3kg (module)
Power Requirements +8V
DC
to +35V
DC
or 20 to 28V
AC
@ 4VA
Power Connector
2 Way Terminal Block
Operating Temperature
-20 ° C to +65 ° C
Relative Humidity
0 to 95% non-condensing
Cassis Current Consumption
0.4Amp
1022215101