Optical Systems OSD2151 SERIES, Operator'S Manual, Page: 5 / 20

OPTICAL SYSTEMS DESIGN
DOC ID: 10110603
OSD2151 OPERATOR MANUAL
PAGE 5
1 TECHNICAL SUMMARY
1.1 BRIEF DESCRIPTION
1.1.1
OVERVIEW
The OSD2151 is designed to convert between 10/100/1000Base-T copper cabling and 1000Base-Fx
fiber cabling with the added feature of Link Loss Forwarding. It has one RJ45 copper port and one SFP
port which can be specified by the user for one or two fiber configuration.
The OSD2151 incorporates Link Loss Forwarding (LLF) function providing fault detection and shut
down when a link fails.
The unit will operate on either singlemode or multimode fiber. Operation over at least 500m of
multimode fiber or 50km of singlemode fiber is possible by use of the appropriate optical devices.
A major benefit of the OSD2151 is its reliable operation over the -20°C to +65°C temperature range
which allows it to be used in environments such as roadside cabinets, mine sites and factories.
1.1.2
APPLICATIONS
▲
Any network utilising a mix of copper
and fiber
▲
Industrial IP communications
▲
Gigabit Ethernet backbone networks
1.1.3
FEATURES AND BENEFITS
▲
Complies with
IEEE802.3i/802.3u/802.3ab
10/100/1000Base-T, IEEE802.3z
1000Base-Lx/Sx standards.
▲
Supports network traffic of up to
1000Mbps.
▲
Has one fixed 10/100/1000BaseT
copper port and one Gigabit SFP port
which may be either copper of fiber
▲
Automatic MDI/MDIX setup: no need
for crossover cables.
▲
Can be used with either singlemode or
multimode fiber over a variety of link
budgets
▲
Advanced features like Link Loss
Forwarding to detect the link status of
link partners either on the fiber and/or
copper port.
▲
Available for operation over 1 or 2
fibers.
▲
Powered by non critical 12V
DC
or
24V
AC
supplies
▲
Operates over the temperature range
of -20 to +65
°
C