OPTICAL SYSTEMS DESIGN
OSD1250 OPERATOR MANUAL
PAGE 9
DOC ID: 10106110
2
INSTALLATION AND OPERATING INSTRUCTIONS
This section briefly outlines the steps required to install and operate the OSD1250 successfully. It should be studied carefully
to avoid undue damage to the equipment and poor operation.
This equipment has been fully tested before dispatch and is ready for immediate operation. However, it is advisable to check
for external transportation damage before operation. If damage is present, return the unit and packing to the supplier
immediately.
2.1
DRAWINGS AND MOUNTING DIMENSIONS
The unit is designed to rest on a flat surface such as a modem tray or bench top or, via the optional mounting bracket onto a
TS32 DIN rail. The card versions are designed to be inserted into a chassis and secured by means of captivated screws.
FIGURE 2: MOUNTING DIMENTIONS
4.2
8.5
DETAIL 'A'
6.6
128
111
144
109
40
128
142
50
