OPTICAL SYSTEMS DESIGN
DOC ID: 10111701
OSD9003/OSD9004 OPERATOR MANUAL
PAGE 7
2.3
OSD9003/OSD9004 DRAWINGS AND DIMENSIONS
The OSD9003/OSD9004 standalone module is designed to be mounted on an even surface and to be
secured by means of M4 or smaller screws.
FIGURE 1: OSD9003/OSD9004 MOUNTING DIMENSIONS
2.4
OSD9003/OSD9004 FRONT AND REAR PANELS
The front panel consists of an optical output (OSD9003) optical input (OSD9004), 6-way DIP switch
and LED indicators. The rear panel consists of a 3-way terminal block power/alarm connector, an RF
Input (OSD9003) and an RF Output (OSD9004) . Each section will be described further throughout this
manual.
FIGURE 2: OSD9003/OSD9004 FRONT/REAR PANELS
R2.1
R2.1
Ø8.5
8.0
8.0
DETAIL A
2
6
.4
60
83.4
DETAIL A
6
94
38
25.6
25.6
DIP Switch
LED Indicators
Optical Output
RF Input
Power/Alarm
Front Panel
Rear Panel
DIP Switch
LED Indicators
Optical Input
RF Output
Power/Alarm
OSD9003
OSD9004
