OPTICAL SYSTEMS DESIGN
DOC ID: 10114402
OSD2167M OPERATOR MANUAL
PAGE 6
1.3
TECHNICAL SPECIFICATIONS
TABLE 1: TECHNICAL SPECIFICATIONS
SPECIFICATION
PERFORMANCE
Electrical Data Interface
IEEE802.3i/802.3u/802.3ab 10/100/1000Base-T Ethernet
Electrical Data Rate
10, 100, 1000Mbps with energy detect, auto negotiate, auto MDIX
Optical Data Interface
IEEE802.3z 1000Base-Sx
Optical Data Rate
1000Mbps
Operating Mode
Half or full duplex for 10/100
Full duplex for 1000
Pause frames for 1000Mbps flow control
Copper Data Connector
RJ45
Power Over Ethernet
Up to 15.4W per IEEE802.3af
PoE Pin Assignment
4/5 (+) and 7/8 (-)
Optical Connectors
SC
Large Frame Support
10KB
Transmitter Wavelength
850nm
Transmitter Optical Power
-9 to -3dBm into 50/125um multimode fiber (OM2, OM3, OM4)
-6 to 0dBm into 62.5/125um multimode fiber (OM1)
Receiver Sensitivity
<-17dBm
Receiver Saturation
>0dBm
Multimode Fiber Link Budget
>8dB: >550m on OM2 or OM3 multimode limited by fiber bandwidth
Dimensions (mm)
60W x 94D x 26H
Weight
0.3kg (module)
Power Requirements
-46 to -56V
DC
@ 4W plus up to an extra 18W for PoE operation (attached
powered device dependant)
Power Connector
Male jack suitable for standard 2.1mm/5.5mm power plugs such as Switchcraft
S761K or equivalent
Operating Temperature
-10
°
C to +55
°
C
Relative Humidity
0 to 95% non-condensing
Mean Time Between Failures
>410,000 hours at 25
°
C, Ground Benign Environment per MIL-HDBK-217F
1022216701
