OPTICAL SYSTEMS DESIGN
DOC ID: 10118201
OSD2139 OPERATOR MANUAL
PAGE 6
1.3
TECHNICAL SPECIFICATIONS
TABLE 1: TECHNICAL SPECIFICATIONS
SPECIFICATION
PERFORMANCE
Electrical Data Interface
IEEE802.3i/802.3u/802.3ab, 10/100/1000Base-T Ethernet
Electrical Data Connector
RJ45 for fixed copper ports (Ports 1 and 2) and for copper SFP module
Port 1 Data Rates
10, 100, 1000Mbps with energy detect, auto negotiate, auto MDIX
Operating Mode
Half or full duplex for 10/100
Full duplex for 1000
Pause frames for flow control
Data Transmission
RS232 on Channel 1, RS422 or RS485 on Channel 2
Contact Closure Transmission
Buffered input, optically isolated MOSFET output (120mA @350V(max))
Data/Alarm Connector
Female DB15
Optical Port Connector
SFP
Various SFP Options Possible
Short haul, long haul, single fiber operation, etc.
Please consult OSD DATASHEET #1002100006 or contact OSD
Indicators
1x Power
1x Copper Speed/Activity/Link on RJ45
1x Copper Duplex on RJ45
1x SFP Speed/Activity/Link for copper or fiber
Dimensions (mm)
114W x 105D x 32H (module)
Weight
0.5kg
Power Requirements
+8V to +35V
DC
@ 8VA (with 1 SFP loaded)
Power Connector
2-way terminal block
Operating Temperature
-20
C to +75
C
Relative Humidity
0 to 95% non-condensing
