I
Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
●
CAUTION (UPS Having Internal Batteries)
: Risk of electric shock - Hazardous live
parts inside this unit are energized from the battery supply even when the input AC
power is disconnected.
●
CAUTION (No User serviceable Parts)
: Risk of electric shock, do not remove cover.
No user serviceable parts inside. Refer servicing to qualified service personnel.
●
CAUTION (Non-isolated Battery supply)
: Risk of electric shock, battery circuit is not
isolated from AC input, hazardous voltage may exist between battery terminals and
ground. Test before touching.
●
WARNING (Fuses)
: To reduce the risk of fire, replace only with the same type and
rating of fuse.
●
WARNING
: Intend for installation in a controlled environment.
●
CAUTION
: Do not dispose of batteries in a fire, the battery may explode.
●
CAUTION
: Do not open or mutilate the battery, released electrolyte is harmful to the
skin and eyes.
●
CAUTION
: A battery can present a risk of electric shock and high short circuit current.
The following precaution should be observed when working on batteries
Remove watches, rings or other metal objects.
Use tools with insulated handles.
●
To reduce the risk of electric shock, disconnect the UPS from the mains supply before
installing a computer interface signal cable. Reconnect the powers cord only after
signaling interconnections have been made.
●
Servicing of batteries should be performed or supervised by personnel knowledge of
batteries and the required precautions. Keep unauthorized personnel away from batteries.
II
Table of contents
Important Safety Instructions .....................................................................I
Introduction ................................................................................................III
1. Presentation ............................................................................................1
2. Installation ...............................................................................................4
3. Operation .................................................................................................5
4. Alarm ........................................................................................................6
5. Software installation and Interface Port ...............................................7
6. Maintenance and storage.....................................................................10
Appendix A Troubleshooting ...................................................................12
Appendix B Specifications.......................................................................13
