Issue 1
- 1 -
400001
Redwall Wire-Free
WF-100DT Digital Transmitter
User Guide
© Optex (Europe) Ltd. 2007
Every effort has been made to ensure that the contents of this book are correct. However,
neither the authors nor Optex (Europe) Ltd accept any liability for loss or damage caused
or alleged to be caused directly or indirectly by this book. The contents of this book are
subject to change without notice.
Printed and published in the U.K.
1. INSTALLATION
The WF-100DT Digital Transmitter should be programmed to the WF-100CU Control Unit
before commencing the installation. Refer to the Redwall Wire-Free ‘Installation &
Programming Guide’ supplied with the WF-100CU Control Unit.
2. TECHNICAL SPECIFICATION
Radio Section
Operating frequency 868.6625MHz at 20KHz bandwidth.
Power Requirements
2 x Duracell MN1300 (not supplied). Typically two year battery life.
Radio Signalling
Alarm, tamper, supervision and low battery.
Environmental Class
IV Outdoor – General.
Ingress Protection
IP64.
Dimensions
122 x 120 x 85 mm. H x W x D.
Weight 475g.
