Page 11/18
b.) Use Masking plates to narrow detection area, from outside inward.
1. Masking plates are equipped
inside the main unit.
2. Take fixing rubbers off and
the plates can be moved.
Fixing rubber
3. Confirm which mirror should
be masked by area chart.
If some object covers the zone
1 and 2, opposite side of mirror
needs to be masked (photo above).
Masking the Far Area Detection
There are 2 options when masking the Far Area detection.
a.) Use Detection range selector switch (except SIP-5030, SIP-100)
When use this switch, all Far area detection is cancelled.
Far area zone
Be careful of mirroring effects.
