Optex ORT 8820, Instruction Manual

Page: 77 / 91

13 M3330 User Manual
Specifications subject to change without notice Preliminary Confidential Proprietary
Menu Operations
2.1 Auto Scan
When you enter to “Auto Scan” menu, there will display
the screen like below:
1 Firstly please select the country in System Setup
Menu / Region and Time / Region
2 In “Scan Mode” item, press [Left/Right] key to
select scans all channels or just scans free
channels.
3 Moving the highlight to “Search” item and press
[OK] key to start scanning.
4 In the “Auto Scan” menu, press [Exit] key to draw
back from the scanning.
2.2 Channel Scan
When you enter to “Channel Scan” menu, there will
display the screen like below:
1 There is two mode. You can scan channel by
channel or by frequency”.
2 When scan band is UHF, the range of Ch No. is
from 13 to 61. When scan band is VHF, the
range of Ch No. is from 1 to 12.
3 When you complete your modification, move
highlight to “Search” item and press [OK] key,
then it will begin to scan.
4 In the “Channel Scan” item, press [Exit] key to exit
the scanning and save the current parameters.
2.3 Channel Setup
When you enter to “Channel Setup” menu, there will
display the screen like below:
1 You can see the channel information like the
picture displaying
2 Move the [Up/Down] key can move the highlight
to select the channel.
3 When press [OK] key again, you can see the
window like below:
5 Input PID information,then move highlight to
“Search” item and press [OK] key, then it will
begin to scan.