5. INSTALLATION
6. WIRING
5-1. Before the Installation
5-2. Installation Method
Power Input : 10 ~ 28VDC
Alarm Output : N.O.
Alarm Output : N.C.
Tamper (N.C.)
Audio Control Input
(See section 8-4)
Wiring Distance
Power wires should not exceed following length.
When using two or more units on one wire, the maximum length is
obtained by dividing the wire length listed by the number of units used.
Loosen the back plate lock screws.
Do not touch the reflectors.
Remove the back plate by sliding it down
and away from the unit base.
Set the unit base on the back plate,
and fasten the back plate lock screws.
For exposed wiring
Loosen the cover lock screws and remove
the front cover. Do not touch the lens sur-
face.
· UL requires BX-80N to be connected to a UL listed power supply cable of
providing a nominal input of 12VDC, 38mA(MAX)(at 10~28VDC) and
battery standby time of 4 hours.
· The equipment shall be installed in accordance with the National Electrical
Code, NFPA 70.
Remove the knockouts for the exposed wiring
on one side of the front cover with pliers.
After wiring, replace the front cover on the unit
base.
Lead wires through the wiring hole on the unit base and
connect to the terminals. Then, lead wires to the wiring
groove on the lower side of the unit base. Be sure to
put the wires between sponges on the unit base and
back plate for rain, dust and insect protection.
Lead wire through the wiring hole and in-
stall the back plate on the wall in an up-
right position by using provided mounting
screws (two places). Installation height
must be between 2.7ft. and 4ft.(0.8m and
1.2m).
Lead wire through the wiring hole on the
unit base and connect to the terminals
(See section 6). Be sure to put the wires
between sponges on the unit base and
back plate for rain, dust and insect protec-
tion.
1
2
3
1
2
3
Sponge
Power Supply
Wire Size
12VDC
24VDC
500ft. (150m)
1650ft. (500m)
830ft. (250m)
2500ft. (760m)
1300ft. (400m)
4000ft. (1200m)
2000ft. (600m)
6000ft. (1800m)
AWG22 (0.33mm
2
)
AWG20 (0.52mm
2
)
AWG18 (0.83mm
2
)
AWG16 (1.31mm
2
)
