Optelecom 9482-DR, Installation And Operation Manual

Page: 22 / 26

22
Operation of the 9482D with the Network Management
System
Operation of the 9482DT with the Network Management System consists of the following parameters:
1. Slot Number
2. Card Name (Model Number)
3. Serial Number
4. Time
5. Wavelength
6. Revision Number
7. Chronometer Value (Cumulative Hours of Operation)
8. Reset Cycles (Cumulative Number of Power Cycles)
9. Firmware Revision
10. Laser/LED Drive Current
11. Local Demux Sync
12. Remote Demux Sync
13. Temperature
14. Received Optical Power
15. Optical Output Power
16. Vertical Sync Reference Signal Present Input (each channel)
17. Video Input Present (each channel)
Operation of the 9482DR with the Network Management System consists of the following parameters:
1. Card Location
2. Card Name (Model Number)
3. Serial Number
4. Time
5. Wavelength
6. Revision Number
7. Chronometer Value (Cumulative Hours of Operation)
8. Reset Cycles (Cumulative Number of Power Cycles)
9. Firmware Revision
10. Laser/LED Drive Current
11. Local Demux Sync
12. Remote Demux Sync
13. Temperature
14. Received Optical Power
15. Optical Output Power
16. Vertical Sync Reference Signal Present Input (each channel)
17. Transmit Video Input Present (each channel)
NMS users should set the Alarm Status and Alarm Limits for each parameter as required for the specific
application when the NMS software is operated for the first time.
When the 9482D card is installed into an existing system already utilizing NMS system software, an upgrade
of the software will be necessary to add the 9482D card to the software database in the NMS software.
Consult the factory for guidance on how to download the latest version of the software from the TKH Security
USA FTP download site.